Screw Thread Roller Calliper Gauges

S.G. Prittie Precision Gauges Pty. Ltd.
ABN 23 004 719 733
21 King Street Airport West Victoria 3042 Australia

Telephone	(613) 8378 8888
Facsimile	(613) 9335 5201
E-mail	sales@prittie.com.au

Large Screw Thread Roller Calliper Gauge

Small Screw Thread Roller Calliper Gauge

Screw thread roller calliper gauges are used to gauge external screw threads and can be manufactured to gauge all standard thread forms. Special thread forms, multi start threads and worm shafts can also be gauged with a screw thread roller calliper gauge. Setting plugs for calliper gauges are also available. Gauge specifications are derived from national or international standards or from customer specified dimensions. S.G. Prittie maintains an ISO 9002 certified quality system.

Range Manufactured
1.6mm (0.06") to 300mm (12") All thread forms including specials.

Advantages of Calliper Type Gauges

Fast results
Able to gauge long threads quickly
Calliper gauges can be reset
Long life, subject to low wear

Limitations of Calliper Type Gauges

Gauge is presented in only one axial plane at a time
Not recommended for thin wall products
Not recommended for pitch diameter tolerances of less than 0.050mm

Calibration and Resetting Service
All existing S.G. Prittie screw thread roller calliper gauges can be reset and/or calibrated in our NATA accredited laboratory.

Delivery
A stock of finished components ready for assembly enables roller callipers be assembled to customer requirements and delivered in one week.

To enquire further contact sales@prittie.com.au

Screw Thread Roller Calliper Gauge - Exploded View

Applicable Standards
International	I.S.O.
Australia	A.S.
British	B.S.
American	A.N.S.I.
German	D.I.N.
Japanese	J.I.S.

S.G. Prittie Precision Gauges Pty. Ltd.
ABN 23 004 719 733
21 King Street Airport West
Victoria 3042 Australia

Telephone (613) 8378 8888
Facsimile (613) 9335 5201
E-mail sales@prittie.com.au